B-Connected Basic

Modbus communcation
isolated analog and pulse output signals
Display shows flow rate, totaland accumulated total
Scaled pulse output re-transmits the accumulated total
The analog output re-transmits the flow rate
On-screen engineering units are easily configured from a comprehensive selection.

Share as :

Specification

Basic flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is requiredCompact design.

 

  • Compact design.
  • Displays instantaneous flow rate, total and accumulated total.
  • Isolated analog and pulse outputs.
  • Modbus RS485 communication.
  • Durable IP65 (Type 4X) field, wall or meter mount enclosure.
  • One 20mm (0.79″) and two 16mm(0.63″) knock-out hole cable entries.
  • “Know one, know them all” configuration structure.
  • Easy reading and programming with clear alphanumerical display.
  • Clear 12mm(0.5”) numeric digits and 7mm(0.3”) alphanumeric digits.
  • Bright LED backlight.
  • Auto backup of settings and running totals.
  • Lithium AA battery and 10 – 30V DC power supply.
  • Sensor supply: 8.2V DC.
  • Easy configurable via PC with free downloadable remote configuration tool and special communication cable (ACE06).
  • Various accessories are available for this product.

 

Signal Inputs

Flow meter input:

Basic types of flowmeter signals: Namur, Reed – switch, NPN, PNP and Sine wave (coil)

Signal outputs

Pulse outputs

  • Function: Isolated, scaled pulse output according to accumulated total (e.g. a pulse every 3.25 gallons). Frequency: User definable: Off, Long (5Hz/100msec), Intermediate (33Hz/15ms). Type: One isolated solid-state output.

Analog outputs

  • Function: Re-transmitting the flow rate – the output can be scaled to any range (e.g. 200 L/min to 1200 L/min). Type: One isolated 4 – 20mA output.

Supply

Power Supply

  • A single 3,6V lithium AA battery
  • 10 – 30V DC

Sensor Supply

  • 8.2 V DC

Communication

Function: All process data and settings can be read and modified through the communication link.
Protocol: Modbus RTU.
Interface: RS485 2-wire.
HART communication is available with the F018 Flow rate Monitor / Totalizer.

Datasheet

Manual